Xerox ii LINXSolid Inkjet 100 Service Manual

Also see for Nuvera 100: System guide Getting started Install guide Software guide Planning guide

Contents

Xerox ii LINXSolid Inkjet 100 Service Manual Manual pdf 255 page image

Printer Networking 7-7Ethernet® InterfaceBuilt-in Ethernet® ConnectorThe printer’s built-in Ethernet® connector has the followingconnections and indicators:1. LINK indicator—on indicates a working connection to a hub;off indicates no connection to a hub.2. RCV indicator (green)—blinks while the network interface isreceiving.3. XMT indicator (yellow)—blinks while the network interface istransmitting.4. Twisted pair (10Base-T) connector.PhaserShare® Series B Ethernet® InterfaceThe PhaserShare® Series B Ethernet interface conforms to theIEEE 802.3 and Ethernet II standards. With the printer’s built-inEthernet interface, you can connect the printer directly to anEthernet network using twisted pair (10Base-T) cables. With theoptional Ethernet interface card, you can connect the printer directlyto an Ethernet network using twisted pair cables (10Base-T or100Base-Tx or 10Base-2).When an optional Ethernet interface card is installed, the printer’sbuilt-in Ethernet connector is disabled; use the connectors on thecard.When an optional Ethernet interface card is purchased as an upgradekit, follow the instructions that are shipped with the card.To avoid damaging the network interface, turn off the printer beforemaking any Ethernet connections.CAUTION