Xinje XMP2-32 series Operating Manual

Contents

Xinje XMP2-32 series Operating Manual Manual pdf 25 page image

After completing the project editing and saving, connect the download port of XMP and computerserial port with downloading cable, make sure the XMP power is on. Click or“File---Download” to start downloading data, the download window is as below:If it appears the item “connection overtime, check cable”, please download again.The downloading is completed when popping up below window:Attention:(1) Do not cut the power when downloading, or you have to download again.(2) The downloading cable of downloading TouchWin screen is the same as downloading PLCprogram.(3) Do not download when XCPPro and TouchWin software are both opened.5. The extension ability5-1 SummarizationXMP2-32 series product can not extend BD board.For extending other devices, use RS-232 or RS-485 ( point A and B ) com port.RS-232 com port can connect with computer, HMI to monitor the program.RS-485 com port can connect with meter, inverter, function model, etc. It can extend 32 exteriordevices at most.Attention:The connection method is Bus mode, transmission line should start from station 1 to station 2,then from station 2 to station 3…….., connect as this sequence until the last station. Star mode orring mode connections are not permitted.