Xterra TR3.0 Owner's Manual

Also see for Trail Racer TR3.0: Owner's manual Operating manual

Contents

Xterra TR3.0 Owner's Manual Manual pdf 22 page image

20TR3.0 TreadmillThe treadmill is designed so that the tread-belt remains reasonably centered while in use. Itis normal for some belts to drift near one side while in use, depending on a user’s gait and ifthey favor one leg. But if during use the belt continues to move toward one side, adjustmentsare necessary.SETTING TREAD-BELT TRACKINGAn 6mm Allen wrench is provided for this adjustment. Make tracking adjustments on the leftside bolt. Set belt speed at 3 mph. Be aware that a small adjustment can make a dramaticdifference which may not be apparent right away.If the belt is too close to the left side, then turnthe bolt only a 1/4 turn to the right (clockwise) andwait a few minutes for the belt to adjust itself.Continue to make 1/4 turns until the beltstabilizes in the center of the running deck.If the belt is too close to the right side, turn thebolt counter-clockwise. The belt may requireperiodic tracking adjustment depending on useand walking/running characteristics. Some users may affect tracking differently. Expect tomake adjustments as required to center the tread-belt. Adjustments will become less of amaintenance concern as the belt is used. Proper belt tracking is an owner responsibilitycommon with all treadmills.ATTENTIONDamage to the running belt resulting from improper tracking / tension adjustments is notcovered under the XTERRA Fitness warranty.Treadbelt Tracking Adjustment