Page 406.33 Alarm Management ‐ FTPThe Y‐cam can upload an image to an FTP server or send an email upon receiving an alarm from the motion detectionwindow. This page will cover how to upload to an FTP.[Alarm Mode] Activates or deactivates the motion detection alarm.[FTP Alarm Management] Enable/Disable uploading of images on motion detection to an FTP Server.[Trigger Time] The number of seconds that the camera should keep sending images when an alarm is triggered.[Trigger FPS] The number of frames per seconds that the camera should keep sending images at when an alarm istriggered.[FTP Server ID] Select the FTP Server number from the list (set under Alarm Server)[Remote path] Path where to save the image file on to the FTP server.[Snapshot From] Select the stream from which it should get the snapshot.[Image file name] A name for the Image.[Suffix of file name] Image file name suffix can be either date and time or a sequence numberEffective Period:[Always] Always trigger the alarm upon motion detection[Schedule] Trigger the alarm according to the schedule[Alarm interval time] Number of seconds for which the camera should stop uploading images after sending the first set.This function is used to stop the camera from sending multiple alerts for the same alarm. Setting the time to 0 disablesthis feature.Click “Apply” to confirm your settings.