Y-cam Black User Manual

Also see for Knight: User manual

Contents

Y-cam Black User Manual Manual pdf 62 page image

Page 627.5 Resetting the Y‐cam to Factory DefaultsThere are two ways to reset the Y‐cam back to its factory defaults:1. Press the Reset button on the side of the camera through the pin hole.2. Through the Camera Settings / Tools Menu under the heading “Backup or Reset”7.6 Third Party SoftwareY‐cam is supported by number of security software. Some of them are listed below. However you are advised to visithttp://www.y‐cam.com periodically for the updated list.Icatcher http://www.icode.co.ukLuxriot http://www.luxriot.com/Verified Alarm http://www.initsys.co.ukBlueIris http://www.blueirissoftware.comSecurity Spy http://www.securityspy.comCamvista http://www.camvista.co.ukNuuo NVR IP+ http://www.nuuo.comEyesoft http://www.bikal.co.ukNetcamWatcher http://www.netcam‐watcher.comNuuo NVR (IP+) http://www.nuuo.com/product.php?id=12Any software that supports generic MJPEG cameras should work with Y‐cam IP cameras.In order to use the Y‐cams with software that supports adding a generic MJPEG camera, please use the path of yourcamera with “/stream.jpg” on the end of it. This will instruct the software to extract the Motion JPEG video stream fromthe specified path in the Y‐cam. All current Y‐cam models support this method.7.7 Alternative methods of accessing the video streamYou can also access video/images from the network camera in the following ways:• Motion JPEG server push (if supported by the client, Firefox, for example). This option maintains an open HTTPconnection to the browser and sends data as and when required, for as long as required. Enter the path ‐http:///stream.jpg• Still JPEG images in a browser. Enter the path ‐ http:///snapshot.jpg• MJPEG via RTSP: rtsp:///live_mjpeg.sdp• MPEG4 via RTSP: rtsp:///live_mpeg4.sdpRTSP MPEG4 stream: rtsp://10.10.10.133/live_mpeg4.sdpRTSP MJPEG stream: rtsp://10.10.10.133/live_mjpeg.sdpHTTP MPEG4 stream: http://10.10.10.133:8009/stream.avHTTP MJPEG stream: http://10.10.10.133:8009/stream.jpgHTTP snapshot image: http://10.10.10.133:8009/snapshot.jpgFor further details please click on the links in the “Stream Setup” page of the camera settings by the name of “PrimaryStream”, “Secondary Stream” and “Mobile Stream”.