YASKAWA A1000 Quick Start Manual

Also see for A1000 Series: Installation manual Technical manual Technical manual Manual Technical manual

Contents

4 YASKAWA ELECTRIC TOEP C710616 27D YASKAWA AC Drive - A1000 Quick Start Guide1 Safety Instructions and General Warnings1 Safety Instructions and General WarningsYaskawa Electric supplies component parts for use in a wide variety of industrial applications. The selection andapplication of Yaskawa products remain the responsibility of the equipment designer or end user. Yaskawa accepts noresponsibility for the way its products are incorporated into the final system design. Under no circumstances should anyYaskawa product be incorporated into any product or design as the exclusive or sole safety control. Without exception,all controls should be designed to detect faults dynamically and fail safely under all circumstances. All products designedto incorporate a component part manufactured by Yaskawa must be supplied to the end user with appropriate warningsand instructions as to the safe use and operation of that part. Any warnings provided by Yaskawa must be promptlyprovided to the end user. Yaskawa offers an express warranty only as to the quality of its products in conforming tostandards and specifications published in the manual. NO OTHER WARRANTY, EXPRESS OR IMPLIED, ISOFFERED. Yaskawa assumes no liability for any personal injury, property damage, losses, or claims arising frommisapplication of its products. Applicable DocumentationThe following manuals are available for A1000 series drives: General WarningsThe following conventions are used to indicate Safety messages in this manual:A1000 Series AC Drive Technical ManualThis manual provides detailed information on parameter settings, drive functions, and MEMOBUS/Modbus specifications. Use this manual to expand drive functionality and to take advantage ofhigher performance features.A1000 Series AC Drive Quick Start Guide (this book)Read this manual first. This guide is packaged together with the product. It contains basicinformation required to install and wire the drive, in addition to an overview of fault diagnostics,maintenance, and parameter settings. Use the information in this book to prepare the drive for a trialrun with the application and for basic operation.WARNING• Read and understand this manual before installing, operating or servicing this drive.• All warnings, cautions, and instructions must be followed.• All work must be performed by qualified personnel.• The drive must be installed according to this manual and local codes.Heed the safety messages in this manual.The operating company is responsible for any injuries or equipment damage resulting from failure to heed the warningsin this manual.WARNINGIndicates a hazardous situation, which, if not avoided, could result in death or serious injury.CAUTIONIndicates a hazardous situation, which, if not avoided, could result in minor or moderate injury.NOTICEIndicates a property damage message.CIMR-AA2A0021FAA200V 3Phase 5.5kW/3.7kWS/N:5400V5AVERTISSMENT NPJT31470-1Lire le manuel avant l'installation.Attendre 5 minutes après la coupurede l'alimentation, pour permettrela décharge des condensateurs.Pour répondre aux exigences , sassurer que le neutre soit reliéà la terre, pour la série 400V.Après avoir déconnécte la protectionentre le driver et le moteur, veuillezpatienter 5 minutes avain d’effectuerune opération de montage ou decâblage du variateur.Risque de décharge électrique.Surfaces ChaudesDessus et cotés du boitier Peuventdevenir chaud. Ne Pas toucher.WARNINGRead manual before installing.Wait 5 minutes for capacitordischarge after disconnectingpower supply.To conform to requirements,make sure to ground the supplyneutral for 400V class.After opening the manual switchbetween the drive and motor,please wait 5 minutes beforeinspecting, performingmaintenance or wiring the drive.Risk of electric shock.Hot surfacesTop and Side surfaces maybecome hot. Do not touch.LOREF2F1ESCRUN STOPENTERRESETALMDIGITAL OPERATOR JVOP-180