2 System ConfigurationDX100 2.1 Outline2-4HW0486052HW04860522.1.4 Power On UnitThis power on unit is the unit to which an “auxiliary contact block” is addedin order to feed back the status of the built-in contactor to the functionalsafety unit (JZNC-NSU01).The standard power on unit should be replaced with this unit if needed.Item specificationUnit type JZRCR-YPU0□-2Unit size Same size as the standard power on unit(interchangeable)Function Contactor auxiliary contact signal output is added.(for the functional safety unit (JZNC-NSU01))Connector CN609 For the contactor auxiliary contact signal output(added to the standard unit)13/56