YASKAWA DX200 Instructions Manual

Also see for Motoman DX200: Instruction manual Instructions Instructions Setup procedure Instructions

YASKAWA DX200 Instructions Manual Manual pdf 20 page image

3 Ethernet Function Settings3.3 Ethernet Communication Settings3-10165303-1CDHW1481821Ethernet Function3.3.3.2 DNS SETTINGIn “DNS SETTING”, specify whether or not to use DNS (Domain NameSystem) client function and the DNS server setting method when usingthe DNS client function.Select either “NOT USED”, “MANUAL SETTING” or “DHCP SETTING”from the pull-down menu.When “MANUAL SETTING” is selected, be sure also to set “DNSSERVER”. DNS SERVEREnter the IP address to set for DNS server in the format [xx.xx.xx.xx] (xx isa decimal number from 0 to 255) using one-byte numeric characters andperiod (.).If “DHCP SETTING” or “NOT USED” is selected in “DNS SETTING”, thesetting made here is neglected.NOTE“DHCP SETTING” cannot be selected in “DNS SETTING” if“MANUAL SETTING” is selected in “IP ADDRESSSETTING”.(Selecting “DHCP SETTING” causes an error “DHCP is notset to use” to occur.)When selecting “DHCP SETTING” in “DNS SETTING”,select “DHCP SETTING” beforehand in “IP ADDRESSSETTING”.NOTEWhen “MANUAL SETTING” is selected in “SNTPSETTING” and “SNTP SERVER” is set by a host name,“NOT USED” cannot be selected in “DNS SETTING”.(Selecting “NOT USED” causes an error “DNS is alreadyset to use for another item” to occur.)When selecting “NOT USED” in “DNS SETTING”, confirmbeforehand that there is no item set by host name.20/30