YASKAWA IM 053PN Manual

YASKAWA IM 053PN Manual Manual pdf 29 page image

9. Plug again the electronic module, which you have removed before.10. Wire your bus coupler.ð Now you can bring your system back into operation.2.6.2 Demounting periphery modules1. Power-off your system.2. For the exchange of a electronic module, the electronic module may be pulled for-ward after pressing the unlocking lever at the lower side of the module.3. For installation plug the new electronic module guided by the strips at the lower sideuntil this engages to the terminal module.ð Now you can bring your system back into operation.1. Power-off your system.2. Remove if exists the wiring of the module.3.For demounting and exchange of a (head) module or a group ofmodules, due to mounting reasons you always have to remove theelectronic module right beside. After mounting it may be pluggedagain.Press the unlocking lever at the lower side of the just mounted right module and pullit forward.ProceedingExchange of an electronicmoduleExchange of a peripherymoduleVIPA System SLIO Basics and mountingDemounting > Demounting periphery modulesHB300 | IM | 053-1PN00 | en | 19-08 29