YASKAWA IM 053PN Manual

YASKAWA IM 053PN Manual Manual pdf 56 page image

4.5 Web serverPlease consider the System SLIO power and clamp modules do not haveany module ID. These may not be recognized by the PROFINET IOdevice and so are not listed respectively considered during slot allocation.On delivery the PROFINET IO device has no IP address. So that you can access the webserver you have to assign IP address data to this. There are the following possibilities:n Activate the DHCP client via DIP switch 1 of the address switch and get an IPaddress from your DHCP server in the network.n Assign IP address data by means of a DCP tool.n Assign via an IO controller IP address data. It gives you access to the Web server toaccordingly change the IP address data there.The web server is built dynamically and depends on the number of modules, which areconnected to the PROFINET IO device.[1] Module list: PROFINET IO device and System SLIO module in the plugged sequence[2] Functions for the module, which is selected in the module list[3] Information respectively input field for the according functionFor fast diagnostic missing or incorrectly configured modules are shownafter updating the web server in the module list in red.Access via IP addressStructure of the webserverVIPA System SLIODeploymentWeb serverHB300 | IM | 053-1PN00 | en | 19-0856