YASKAWA J1000 CIMR-JC series Quick Start Manual

Also see for J1000 CIMR-JC series: Installation & start-up manual Installation & start-up manual CHEAT SHEET User guide Technical manual

Contents

EN 10 YASKAWA ELECTRIC TOEP C710606 27C - AC Drive J1000 - Quick Start Guide2 Mechanical Installation2 Mechanical Installation Upon ReceiptPlease perform the following tasks after receiving the drive:• Inspect the drive for damage. If the drive appears damaged upon receipt, contact yoursupplier.• Verify receipt of the correct model by checking the information on the nameplate. If youhave received the wrong model contact your supplier. Installation EnvironmentFor optimum performance life of the drive, install the drive in an environment that meets theconditions listed below.Environment ConditionsInstallation Area IndoorsAmbient TemperatureIP20/NEMA Type1 enclosure: -10 to +40CIP20/IP00 Open-Chassis enclosure: -10 to +50CFinless Type: IP20 enclosure: -10 to +50CWhen using an enclosure panel, install a cooling fan or air conditioner in the area toensure that the air temperature inside the enclosure does not exceed the specified levels.Do not allow ice to develop on the drive.Humidity 95% RH or less and free of condensationStorage Temperature -20C to +60CSurrounding AreaInstall the drive in an area free from:• oil mist and dust• metal shavings, oil, water or other foreign materials• radioactive materials• combustible materials (e.g., wood)• harmful gases and liquids• excessive vibration• chlorides• direct sunlightAltitude 1000 m or lessVibration 10 Hz to 20 Hz at 9.8 m/s 2, 20 Hz to 55 Hz at 5.9 m/s 2Orientation Install the drive vertically to maintain maximum cooling effects.