YASKAWA MOTOMAN FS100 Instructions Manual

Also see for MOTOMAN FS100: Instructions Instructions Maintenance manual Instructions Instructions

YASKAWA MOTOMAN FS100 Instructions Manual Manual pdf 25 page image

3 Data Setting and Touch Panel I/F InstructionsFS100 3.2 Details on Interface Panel Setting Items3-12HW1480724HW14807243.2 Details on Interface Panel Setting ItemsThe following describe details on the setting items of the Interfacepanel screen.Refer to them as required when setting the Interface panel data.Table 3-2: Data of Each Setting Items (Sheet 1 of 2)No. Items Explanations1 Arrangement 32 positions in total: 1A to 4H2 Setup 0: INVALID, 1: VALIDVALID ⇒ INVALID: the setup status can be changed from Valid to Invalid withoutconditions.INVALID ⇒ VALID: When the set parameter is OK after checking, the status can bechanged from Invalid to Valid.The following setting is required for VALID status:Input: SignalOutput: none or within the range of general output signalsInput: B-variable, I-variable, or registerInput: B-variable, I-variable, or registerOutput: B-variable, I-variable, or register* If the setting item is edited in the Valid status, the statusbecomes Invalid.3 Panel Type 0:Circle indication light (display only)2:Circle indication light (push-lock/push-release button)4:Square indication light 1 (push button)6:Square indication light 2 (display only)8:Square indication light 2 (push-lock/push-release button)10:Selector switch (right: ON)12:Selector switch (panel operation)16:Counter (3-digit display)18:Preset counter (3-digit display)1:Circle indication light (push button)3:Square indication light 1 (display only)5:Square indication light 1 (push-lock/push-release button)7:Square indication light 2 (push button)9:Selector switch (left: ON)11:Selector switch (2-point output)17:Counter (6-digit display)19:Preset counter (6-digit display)4 Panel Color 0: Black, 1: Blue, 2: Green, 3: Sky blue, 4: Red, 5: Purple, 6: Yellow,7: White, 8: Light gray, 9: Dark blue, 10: Dark green, 11: Dark sky blue, 12: Dark red,13: Dark purple, 14: Dark yellow, 15: Dark gray,16: Orange5 Panel Name 10 one-byte characters for one lineThree lines can be indicated at maximum.6 Text Color 0: Black, 1: Blue, 2: Green, 3: Sky blue, 4: Red, 5: Purple, 6: Yellow,7: White, 8: Light gray, 9: Dark blue, 10: Dark green, 11: Dark sky blue, 12: Dark red,13: Dark purple, 14: Dark yellow, 15: Dark gray,16: Orange7 Security 0: Operation mode, 1: Editing mode, 2: Management mode8 Interlock Enable 0: Prohibited, 1: Permitted9 Input ID 0: None, 1: Signal, 2: B-variable, 3: I-variable, 4: RegisterNo. Numbers differ according to the ID.(See the table table 3-3 “Input/Output Allocation Status” at page 3-14.)Contact OFF: A-contact, ON: B-contactThe setting is invalid when the ID is not set to 1:Signal.25/39