YASKAWA MP2000 Series User Manual

Also see for JAPMC-MC2100: User manual User manual

Contents

YASKAWA MP2000 Series User Manual Manual pdf 27 page image

1.2 Specifications1.2.1 SVB-01 Module Hardware Specifications1-9 Overview1.2 Specifications1.2.1 SVB-01 Module Hardware SpecificationsItem SpecificationsDescription SVB-01Model Number JAPMC-MC2310Module AppearanceMax. No. of Modules to be mounted MP2300: 2, MP2200: 16MECHATROLINK Motion NetworkMotion network: 1 channelCommunication ports: 2 portsSERVOPACK and I/O:Up to 21 stations connectable (SERVOPACK for up to 16 axes)Baud rate:4 Mbps (MECHATROLINK-I) or 10 Mbps (MECHATROLINK-II)IndicatorsRUN (green)ERR (red)TX (green)SwitchesDIP Switch−M/S (Master/Slave)SIZE (Number of transfer bytes)SPD (Baud rate)Rotary Switch ×1 (slave address)×10 (slave address)EnvironmentalConditionsAmbient OperatingTemperature 0°C to 55°CAmbient StorageTemperature -25°C to 85°CAmbient OperatingHumidity 30% to 95% RH (with no condensation)Ambient StorageHumidity 5% to 95% RH (with no condensation)Pollution level Pollution level 2 (conforming to JIS B 3502)Corrosive Gas There must be no combustible or corrosive gas.Operating Altitude 2,000 m above sea level or lowerMechanical OperatingConditionsVibrationResistance Conforming to EN61000-6-2, EN61000-6-4, EN55011 (Group 1 Class A)Shock Resistance Conforms to JIS B 3502.Peak acceleration of 147 m/s2 twice for 11 ms each in the X, Y, and Z directionsElectrical OperatingConditions Noise ResistanceConforms to EN 61000-6-2 and EN 55011 (Group 1, Class A).Power supply noise (FT noise): 2 kV min., for one minuteRadiation noise (FT noise): 1 kV min., for one minuteInstallationRequirementsGround Ground to 100 Ω max.Cooling Method Natural coolingDimensions (mm) 125 × 95 (H × D)SVB-01TXERRRUNSPDSIZEM/SONOFF101M-I/IICN1CN2LED indicatorsࠉRotary switches(For station addresssetting)DIP switchMECHATROLINKconnectorMECHATROLINKconnector