YASKAWA SI-EM3 Installation Manual

Also see for SI-EM3: Technical manual Technical manual Technical manual Installation manual Technical manual

Contents

5 Installation Procedure20 YASKAWA ELECTRIC TOBP C730600 57B 1000-Series Option SI-EM3 Installation Manual4. Connect the ground wire (I) to the ground terminal (K) using one of the remainingprovided screws (H). Connect the other end of the ground wire (I) to the remainingground terminal and installation hole on the option (B) using the last remainingprovided screw (H) and tighten both screws to 0.5 to 0.6 Nxm (4.4 to 5.3 in lbs).Figure 6Figure 6 Connect the Ground WireNote: There are two screw holes on the drive for use as ground terminals (K). When connecting threeoptions, two ground wires will need to share the same drive ground terminal.HIKBA1000