YASKAWA SI-EM3 Technical Manual
Also see for SI-EM3: Technical manualTechnical manualInstallation manualInstallation manualTechnical manual
                                               | |
3 ReceivingYASKAWA ELECTRIC SIEP C730600 91C YASKAWA AC Drive Option SI-EM3 Technical Manual 93 ReceivingAfter receiving the option package:1. Make sure that the option is not damaged and no parts are missing. Contact your sales outlet if the option or other partsappear damaged.NOTICE: Do not use damaged parts to connect the drive and the option. Failure to comply could damage the drive and option.2. Confirm that the model number on the option nameplate and the model listed in the purchase order are the same. Referto Figure 1 on page 10 for details. Contact the distributor where the option was purchased or contact Yaskawa or aYaskawa representative about any problems with the option. Option Package ContentsTable 2 Option Package Contents Installation Tools• A Phillips screwdriver. Phillips screw sizes vary by drive capacity.• A flat-blade screwdriver (blade depth: 0.4 mm (0.02 in), width: 2.5 mm (0.1 in)).• A pair of diagonal cutting pliers.• A small file or medium-grit sandpaper.Description:<1> GA700 and GA800 drives do not use the ground wire.<2> GA700 and GA800 drives use two screws only.Option GroundWire <1> Screws (M3)LED LabelsInstallation ManualA1000, D1000,R1000, U1000,U1000L,Z1000UZ1000 GA700 andGA800_Quantity: 1 1 3 <2> 1 1 1 1NS MSNSMSMANUAL |
Related manuals for YASKAWA SI-EM3
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine