YASKAWA SI-S3 Installation Manual

Also see for CANopen SI-S3: Installation manual Technical manual Installation manual

Contents

YASKAWA ELECTRIC TOBP C730600 85D YASKAWA AC Drive Option SI-S3 Installation Manual 4910 European Standards10 European StandardsFigure 18Figure 20 CE MarkThe CE mark indicates compliance with European safety and environmental regulations. Itis required for engaging in business and commerce in Europe.European standards include the Machinery Directive for machine manufacturers, the LowVoltage Directive for electronics manufacturers, and the EMC guidelines for controllingnoise.This option displays the CE mark based on the EMC guidelines.EMC Guidelines: 2014/30/EUDrives used in combination with this option and devices used in combination with the drivemust also be CE certified and display the CE mark. When using drives displaying the CEmark in combination with other devices, it is ultimately the responsibility of the user toensure compliance with CE standards. Verify that conditions meet European standards aftersetting up the device.u EMC Guidelines ComplianceThis option is tested according to European standards EN 61800-3:2004/A1:2012 andcomplies with EMC guidelines. The CE marking is declared based on the harmonizedstandards.n EMC Guidelines Installation ConditionsVerify the following installation conditions to ensure that other devices and machinery usedin combination with this option and drives also comply with EMC guidelines:1. Use dedicated shield cable for the option and external device (encoder, I/O device,master), or run the wiring through a metal conduit.2. Keep wiring as short as possible and ground the largest possible surface area of theshield to the metal panel according to Figure 22.