YASKAWA V1000 Technical Manual

Also see for PROFIBUS-DP SI-P3: Technical manual Installation manual Technical manual Technical manual Technical manual

Contents

4 PROFIBUS-DP Option ComponentsYASKAWA ELECTRIC SIEP C730600 23C V1000 Option SI-P3/V Technical Manual 94 PROFIBUS-DP Option Components PROFIBUS-DP OptionFigure 2Figure 2 Option Unit DimensionsThe installed PROFIBUS-DP Option adds 27 mm (1.06 in.) to the total depth of the drive. (Figure 3)Figure 3Figure 3 DimensionsA – LED (Comm: green) <1><1> For details on the LEDs, refer to PROFIBUS-DP Option LED Display on page 10 andUnderstanding LED Display on page 11.<2> Cables are not connected to the PROFIBUS-DP Option and are packaged separately inthe box.H – NameplateB – LED (BF: red) <1> I – Function Earth cableconnection (FE)C – Option cover J – Mounting clipD – LED (ERR: red) <1> K – Cable <2>E – LED (RUN: green) <1> L – Through-hole for cableF – PROFIBUS-DP PCB M – Communication cableconnector (9-pin D-SUB)G – Attachment screw hole foroption coverN – Option board connector(CN5)NJGFJIKLPROFIBUS-DP with cover removedUndersideMSI-P3FEAED BCPROFIBUS-DP with cover attachedHRUNERR COMMBF27 mm (1.06 in.)