YASKAWA YRC1000 Instructions Manual

Also see for YRC1000: Instructions Instructions Instructions Instructions Collaborative Operation Instructions

YASKAWA YRC1000 Instructions Manual Manual pdf 15 page image

3 Teaching3.3 Cutting Width Correction Function3-6HW1483590HW14835903.3 Cutting Width Correction FunctionThe cutting width correction function shifts the scale of the cutting width ofthe laser for the cutting path when cutting the form according to thepattern. The following parameter is used for the setting.Set the cutting width of the laser to 1/2 of its value. When cutting, the pathis corrected by the parameter set values.The following illustration is an example of the path correction when cuttingthe ellipse pattern. The correction for the motion path is similar whenusing the other patterns.The center of the circle does not change before and after the cutting widthcorrection.Parameter Contents Initial ValueS3C1191 Cutting width correction(in units of 0.001 mm)0 mmWhen the cutting width correction value is (+)When no cutting width correctionWhen the cutting width correction value is (-)The set value at S3C119115/49