Yaesu FT-250R Operating Manual

Also see for FT-250R: Manual Technical supplement

Yaesu FT-250R Operating Manual Manual pdf 33 page image

FT-250R O PERATING M ANUAL 29f Press the [F/L] key, then press the [F/L] key again, to begin entry of the letters andnumbers in your callsign.g Rotate the DIAL to select the first letter or number in your callsign. When the correctcharacter has been selected, press the [V(MHz)] key to move on to the next character.h Repeat step g as many times as necessary to complete your callsign. Note that the“slant bar” (– • • – •) is among the available characters, should you be a “portable”station.i When you have entered your entire callsign, press the [F/L] key.j Press the PTT key to save the settings and exit to normal operation.Note that the “DE” (– • • •) preceding your callsign is already programmed; you only needto program your callsign, and the “DE” will be appended at the time of transmission.To activate the CW identifier:c Press the [F/L] key, then press the [0(SET)] key, to enter the Set mode.d Rotate the DIAL to select Menu #29 (“CW IDCW IDCW IDCW IDCW ID”).e Press the [F/L] key to enable changing of this Menu item.f Rotate the DIAL to set the CW ID function ON.g When you have made your selection, press the PTT key to save the new setting andexit to normal operation.ARTS (Automatic Range Transponder System) Operation