Yaesu FT-2900E Operating Manual

Yaesu FT-2900E Operating Manual Manual pdf 50 page image

46 FT-2900E O PERATING M ANUALM EMORY B ANK LINK SCANWhen the Memory Bank feature is engaged, the scanner sweeps only memory channels inthe current Memory Bank. However, if the Memory Bank Link Scan feature is enabled, youmay sweep the memory channels in several Memory Banks which you have selected.To enable the Memory Bank Link Scan feature:1. Set the radio to the Memory mode by pressing the [D/MR(MW)] key, if necessary.2. Press and hold in the [MHz(SET)] key for one second, thenrotate the DIAL knob to select “8 BNK.LNK8 BNK.LNK8 BNK.LNK8 BNK.LNK8 BNK.LNK.”3. Press the [MHz(SET)] key momentarily, then rotate theDIAL knob to select the first Memory Bank (“b1b1b1b1b1” ~ “b8b8b8b8b8”)you wish to sweep using Memory Bank Link Scan.4. Press the [D/MR(MW)] key momentarily. A “SKIP” iconwill blink above the Memory Bank number, indicating thisMemory Bank will now be swept during Memory BankScan.5. Repeat steps 3 and 4 above, to append the blinking “SKIP”icon to any other Memory Banks you wish to sweep.6. Now, press and hold in the [MHz(SET)] key for one sec-ond to initiate the Memory Bank Link Scan.7. To remove a Memory Bank from the Memory Bank Link Scan, repeat steps 2 - 4 above,to delete the blinking “SKIP” icon from the Memory Bank number indication.S CANNING