Yaesu FT-891 Operating Manual

Also see for FT-891: Information for Customers Operating Advance manual Reference book Operating manual Quick manual

Contents

8Installing the RadioFT-891 Operating ManualInstall the main bodyInstall the main body using the provided MMB-82 bracket.r Do not install the FT-891 in a place with intense vibration.r Attach the bracket firmly with the supplied screws, so it will not become loose.1. Holes in the location where the bracket is to bemountedDrill four 6 mm diameter holes in the location wherethe bracket is to be mounted matching the positions ofthe bolting holes of the bracket.2. Attach the bracketUsing the provided bolts, nuts and washers.3. Fasten the transceiver to the bracketUsing the provided flange bolts, as shown in thedrawing.r The mounting angle can be changed dependingon the securing position of the flange bolts.BoltNutWasherWasherBracketFlange boltMain BodyInstall the Front PanelInstall the front panel using the optional bracket.r The bracket can be bent by hand to match the location where the controller is going to be installed.Take due care not to injure yourself when bending the bracket.r Select a stable, flat location with as few dents and protrusions as possible.Installation location when used in a mobile unitFront PanelIt is recommended that the front panel beinstalled on top of the car dash board.Main bodyIt is recommended that the main body beinstalled below the car dash board.r Do not install the front panel, thetransceiver or the wire cables near theair bags. In case of emergency, thetransceiver may interfere with air bagdeployment and result in accidents andinjury. The wire cables may also causethe air bag to malfunction. Radio main bodyController