17Receiving APRS ® beaconsy Description of Station List DesignatorsExamples of 14 types of station list designators are described here. Refer to the descriptionpage listed on the table for the detail screen.Display Description PageE Mic-E: Displayed when a beacon of a microphone encoder station isreceived 18P Position: Displayed when the beacon from a fixed station (FIXED) or amobile station (MOVING) is received 19-21p Position: Displayed when the beacon of a fixed station (FIXED) or a mobilestation (MOVING) is received (compression type) 22W Weather report: Displayed when the beacon of a meteorological station isreceived 23w Weather report: Displayed when the beacon of a meteorological station isreceived (compression type) 23O Object: Displayed when the beacon of an object station is received 24o Object: Displayed when the beacon of an object station is received(compression type) 24I Item: Displayed when the beacon of an item station is received 24i Item: Displayed when the beacon of an item station is received (compressiontype) 24K Killed Object/Item: Displayed when a deleted object station or item station isreceived 24k Killed Object/Item: Displayed when a deleted object station or item station isreceived (compression type) 24S Status: Displayed when the beacon of a status station is received 25? Other: Displayed when a beacon that cannot be interpreted is received 26Emg Displayed when an emergency signal from a Mic-E station is received 18Tips• When the transceiver is turned ON, if the detail screen is displayed before the GPS satellites areacquired, the position arrow and distance will not be displayed.• If GPS satellite information is no longer available due to obstructions such as buildings, tunnels,etc., the most recently acquired coordinates (position arrow, latitude / longitude, distance) will bedisplayed. The accurate position information will be displayed again when you move to a positionthat can be located.