FTA-250L O perATing MAnuAL20The channel in use is black and the unused channelsare white.Channel in use Unassigned Channel5. Press and hold the [ENT] key.6. Change the memory nametag.(If the nametag is not changed, à Go to step 9)Select the characters with the [DWN] / [UP] key orthe numeric keypad.z Each time the [DWN] or [UP] key is pressed, thecharacters change as follows:Û 0~9 Û A~Z Û symbol Û 0~9 Ûz Example: Each time you press the [2] key, the letterschange as follows.2 à A à B à C à 2 à7. Press the [ENT] key to move to the right digit.8. Repeat steps 6 to 7 to complete the nametag.9. Press and hold the [ENT] key.Changes are registered and the changed memorychannel is displayed.Dual Watch featureThe previously specified PRIORITY-CH frequency isperiodically checked for activity, and a signal on thechannel is received.Setting Priority Channel1. Press and hold the [MAIN/SET] key.2. Press the [DWN]( )key.3. Press the [DWN](▼) key to select “PRIORITYCH”.4. Press the [GROUP] ( ) key.5. Enter the frequency you want to check on aregular basis.6. Press and hold the [ENT] key.The Priority Channel frequency is set, and thedisplay returns to the setup screen.7. Press the PTT switch to return to the normaloperation screen.