Yaesu FTA-250L Operating Manual

Also see for FTA-250L: Operating manual Information sheet

Yaesu FTA-250L Operating Manual Manual pdf 30 page image

FTA-250L O perATing MAnuAL28Resetting the TransceiverTo reset all the settings and memory contents of thistransceiver to their initial values (factory default).Resetting the transceiver will clear all memories.Please make a note of the memories (memory channelsettings, etc.) before resetting.1. Turn off the transceiver.2. P r e s s a n d h o l d t h e[MAIN/SET] and [ENT]keys while turning thetransceiver ON.3. Reset is complete when the sound “beeps” andthe power turns on.Headset ConnectionAn optional headset may be connected using thesupplied SCU-15 Headset Adapter Cable.1. Remove the two screws and cover of the MIC/SPjack located on the right side of the transceiver.2. Insert the plug of the SCU-15 to the MIC/SP jack.3. Fix the plug with two screws attached to the SCU-15.4. Insert the plugs of the headset to the sockets ofthe SCU-15.Headset(not supplied)SCU-15Headset Adapter Cable