FTA-750/FTA-550 O perATing MAnuAl59gps FunctIon (Fta-750 only )Displaying the Position InformationYou can choose the way to display the positioninformation from three types; numerical, compass, andnumerical with GPS status.Notes: You may change the unit of displayed measure-ments via the SETUP mode. You may set the time area and offset via the SETUPmode. The position information will be displayed withthe screen type you have selected last time beforeswitching the operation mode or turning off the ra-dio.Numerical display1. Press the [MENU] key to display the MENU screen .2. Select “GPS” on thescreen by pressing the[◄] or [►] key, andthen press the [ENT]key.3. Select “GPS INFO” onthe screen by pressingthe [◄] or [►] key, andthen press the [ENT]key.MARK POSITIONGPS INFOCOMPASSGPS STATUSGPSThe latitude and lon-gitude of your currentposition, COG (courseo v e r g r o u n d ) , S O G(speed over ground),altitude, and the datewill be displayed belowthe VOL meter on thescreen.133.800MRFLGVOLLAT/LON23°56.890N123°56.890WCOG095°Oct/25 09:56AMSOGKT095 ALTM0956.8BUSYMEMDATEKLAX-ATISNote:The power save operation of the GPS unit is disabledwhile displaying the position information.