Yaesu FTDX 9000 Series Operation Manual

Contents

Page 6 FTDX9000D OPERATION MANUAL6. Adjusting the Main Dial TorqueThe torque (drag) of the Main Tuning Dial may be adjusted according to your preferences. Simply hold down the rear skirtof the knob, and while holding it in place rotate the Main Dial itself to the right to reduce the drag, or to the left to increasethe drag.Before You Begin. . .7. Restarting Power after a Voltage FluctuationIf your AC mains power should suffer a significant fluctuation or interruption, we recom-mend that you go through a complete power-up cycle, in order to ensure that all circuits areproperly initialized. To do this, be sure the front panel Power switch is turned off, then setthe rear-panel Power switch to the “O” position. Now unplug the AC cable from the rearpanel of the transceiver, and wait ten seconds. Plug the AC cable back in, set the rear-panelPower switch to “O,” and now press and hold in the front-panel Power switch for twoseconds to turn the transceiver on. After about 50 seconds, all circuits wil be initialized, andnormal operation may resume.TIGHTEN TOOSENHOLDING THE SKIRT