Yaesu FTM-100DR Instruction Manual

Also see for FTM-100DR: Instruction manual Instruction manual Operating manual Quick manual Operating manual

Contents

Yaesu FTM-100DR Instruction Manual Manual pdf 8 page image

8Connecting to a Faraway Station Using WIRES-XFinding a local nodeTo communicate using WIRES-X, a WIRES-X node station (local node) must beestablished within radio contact range of the user transceiver.WIRES-X nodes are stations users voluntarily registered with Yaesu. Their informationsuch as locations and operation styles are listed on our website:https://www.yaesu.com/jp/en/wires-x/index.phpFirst use this list to search for a nearby local node, and nodes on the Internet used bypeople you want to communicate with; write down the node names and frequencies.Since the connection procedure differs between digital stations and analog stations,confirm whether the node is an analog station or a digital station.• When the local node is a digital station:Connect from your transceiver in digital mode.(Nodes on the Internet can connect to both digital and analog stations.)• When the local node in an analog station:Connect from your transceiver in analog mode.(Nodes on the Internet can connect to both analog and digital stations.)Connecting in digital modeCautionBefore using WIRES-X, press to set the communication mode of the operating band to any modeother than [FM]. For details, refer to “Selecting communication mode” in the basic operating manual.