Yaesu VX-3R Manual

Also see for VX-3R: Technical supplement Manual Operating manual

Yaesu VX-3R Manual Manual pdf 1 page image

VX-3R ModsVX-3 Mars/CapYaesu VX-3 Mars/Cap mod is as simple as removing the resistor under the little black sticker (center of the window on the upperregion of the lower circuit board) & doing a hard reset.This resistor is brown and is oriented vertically with contacts top/bottom.Note:Some have a black resistor but the mod work the same.Reset is:Microprocessor Reset on Page 128 of the Manual kills all memories and settingsPower OffHold [MODE] + [V/M] and Power OnPress [F/W]VX-3R TX WIDEBAND 120-220 & 300-576Mhz MODSYAESU VX-3R TX WIDEBAND 120-220 & 300-576MhzTHIS MOD COME FORM VARIOUS SOURCE ON THE NET.THIS MOD CAN CHANGE THE "COUNTRY MODE" OF YOUR RIG BUT KEEP IN MIND THAT REGULATORY OF STATESARE PRESERVED, SO YOUR RIG WILL ACT DIFFERENT FROM WHAT YOU EXPECT. ALSO REMEMBER THAT THEKEYBOARD LABELS CAN NOT REFLECT ACTUAL FUNCTIONS.1. Set mode 19-CWID to AH028M-power on, then press and hold SET to go to SET function-turn the dial to 19-CWID-press SET and turn to ON-press V/M to text enter screen-dial one character by one, press V/M for next character, to set itto AH028M, press 2 more V/M to leave text enter screen-press SET to go back to SET function2. Power off3. Press and hold both MODE key and TXPO key, then power on4. You will not see voltage screen this time. Instead there areKB2LJJ Radio Mods Database and Manuals http://www.kb2ljj.com/data/yaesu/VX-3R.htm1 dari 2 06/11/2009 19:29

/ 2

Related manuals for Yaesu VX-3R