Yaesu VX-6E Operating Manual

Contents

VX-6R/E OPERATING MANUAL72Operation (Accessing an FRG Node)1. Press the [F/W] key, then press the [0(SET)] key to enter the Set mode.2. Rotate the DIAL knob to select Set Mode Item 30: INT MD.3. Press the [0(SET)] key to enable adjustment of this Set ModeItem.4. Rotate the DIAL knob to set this Set Mode Item to “FRG” (thusactivating the “Other Internet Link System” mode).5. Press the PTT switch to save the new settings.6. Press the [ (LK)TXPO] key momentarily to activate the InternetConnection feature. The “ ” icon will appear in the upper rightcorner of the display.7. Rotate the DIAL knob while pressing the [ (LK)TXPO] key to select the InternetMemory register number (F 0 ~ F63) corresponding to theInternet link repeater to which you wish to establish an Internetlink, then press the PTT switch momentarily to lock in the se-lected access number.8. Once the Internet Connection feature is activated per step 6 above, you may now pressthe [ (LK)TXPO] key, while you are transmitting, to send outthe selected DTMF string (to establish the link to the desiredInternet-link mode).9. To return to the WIRES™ mode, repeat steps 1 - 5 above, selecting “SRG” in step 4.You may send out another DTMF string which has been stored in the Internet Memoryresister (F 0 ~ F63). To do this:1. Press the PTT switch.2. Press the [P(DMR)] key while pressing the PTT switch.3. Rotate the DIAL knob, while pressing the PTT switch, to select the Internet Memoryregister number (F 0 ~ F63) corresponding to the Internet link repeater that you wishto contact, then press the [P(DMR)] key again to send out the selected DTMF string.I NTERNET C ONNECTION F EATUREFRG (“FRIENDLY RADIO GROUP”) MODE