– 74 –Installing the CrankcaseTightening the bolts1. Tighten the bolts in the tightening sequence of 1 to 10 to 29.4N•m (3.0kg•m).2. After loosening the bolts once in the tightening sequence of 1 to 10, retighten them one byone to 17.6N•m (1.8kg•m).3. Retighten the bolts in the tightening sequence of 1 to 10 to a turn-of-nut angle of 56° – 61°(60° at new).Tightening torque for reference: 35.0N•m (3.5kg•m)4. Tighten the bolts in the tightening sequence of 11 to 20 to 24±2N•m (2.4±0.2kgf•m).5. Tighten the bolts in the tightening sequence of 21 to 40 to 10±2N•m (1.0±0.2kgf•m).TIPThe numbers 1 to 40 show the sequence in which the bolts are tightened.Apply engine oil to the bolt threads and both sides of the washers.These numbers indicate the tightening sequence.2930 312123 18242511 26 1427 2816179822341213192037383639403533321510 2 631574
