Operation393. Push the power tilt / power trim and tiltswitch “ ” (down) to lower the outboardmotor to the desired position.EMU28060Cruising in shallow waterThe outboard motor can be tilted up partiallyto allow operation in shallow water.EMU28090Power trim and tilt models / power tiltmodelsThe outboard motor can be tilted up partiallyto allow operation in shallow water.WARNINGEWM00660 Place the gear shift in neutral beforesetting up for shallow water cruising. Return the outboard motor to its normalposition as soon as the boat is back indeeper water.CAUTION:ECM00260Do not tilt the outboard motor up so thatthe cooling water inlet on the lower unit isabove the surface of the water when set-ting up for and cruising in shallow water.Otherwise severe damage from overheat-ing can result.EMU28184Procedure for power trim and tilt / powertilt models1. Place the gear shift lever in neutral.2. Slightly tilt the outboard motor up to thedesired position using the power trim / tiltswitch.ZMU03998DNZMU01936UPDNDNZMU04147
