Operation32with no binding or excessive free play. Operate the throttle levers several times tomake sure there is no hesitation in theirtravel. Operation should be smooth overthe complete range of motion, and each le-ver should return completely to the idle po-sition. Look for loose or damaged connections ofthe throttle and shift cables.EMU36481Engine shut-off cord (lanyard)Inspect the engine shut-off cord for damage,such as cuts, breaks, and wear.EMU27120Oil Check to be sure you have plenty of oil foryour trip.EMU27141Engine Check the engine and engine mounting. Look for loose or damaged fasteners. Check the propeller for damage.EMU36953Install cowling1. Be sure that a cowling lock lever is re-leased.2. Be sure that the rubber seal is seated allthe way around the top cowling.3. Place the top cowling on bottom cowl-ing.4. Check to be sure the rubber seal fits cor-rectly all the way around the engine.5. Move the lever to lock the cowling asshown. NOTICE: If the cowling is notinstalled correctly, water spray underthe cowling can damage the engine,or the cowling can blow off at highspeeds. [ECM01990]After installing, check the fitting of the topcowling by pushing it with both hands. If thetop cowling is loose, have it repaired by yourYamaha dealer.1. Cord2. Clip3. Engine shut-off switch1. Cord2. Clip3. Engine shut-off switch2 13ZMU03689ZMU06117