Yamaha 50G Service Manual

Also see for 50G: Owner's manual Owner's manual

Yamaha 50G Service Manual Manual pdf 192 page image

8-31– +ELEC ESTARTER MOTORM71001-0*STARTER MOTORREMOVAL1. Disconnect the cables and remove thestarter-motor.DISASSEMBLY1. Remove the starter-clutch. Using ascrew-driver, pry off the clip.1 Clip2 Pinion Stopper3 Pinion (starter clutch)NOTE:Push the pinion stopper by hand toward thepinion and remove the clip.2. Remove the two through-bolts and pullout the front cover lightly tapping itwith a plastic hammer, if necessary.3. Using a piece of steel wire, separate thebrush springs and remove the brushesfrom the brush-holders.4. Remove the yoke assembly by lightlytapping it with a plastic hammer andremove the armature.1 Clip2 Pinion stopper3 Spring4 Pinion (starter clutch)5 Front cover6 O-ring7 Washer(50, 60, 70 hp: t = 1.0 mm,75, 80, 90 hp: t = 2.0 mm)8 Washer(50, 60, 70 hp: t = 0.15 mm,75, 80, 90 hp: t = 0.3 mm)9 Washer(50, 60, 70 hp: t = 2.0 mm,75, 80, 90 hp: t = 1.0 mm)0 ArmatureA Yoke assemblyB BrushC Brush holderD O-ring (50, 60, 70 hp)E Rear coverF Through-bolt50, 60, 70 hp 75, 80, 90 hp