Yamaha 50G Service Manual
Also see for 50G: Owner's manualOwner's manual
                                                                                                                                                                                                            | |
Contents
| 
6-3ELOWR PREPARATION FOR REMOVAL/DISASSEMBLY120001-0*PREPARATION FOR REMOVAL1. Remove the nut, washer, propeller andspacer from the propeller shaft.2. Drain the gear oil by removing theplugs from the oil-filling hole and theoil-level hole. Be sure to remove the oilfilling plug first.3. Set the shift lever into neutral position.4. Tilt up the lower unit and lock it with thetilt lock lever.5. Remove the trim tab. Before removingit, put a mark indicating its position onthe anticavitation plate.6. Remove the bolts.140007-0DISASSEMBLY1. Referring to the exploded diagram,remove the following parts.1) Water pump housing and insert car-tridge2) Impeller and woodruff key3) Oil-seal housing(Water pump housing)Remove the oil seals, if necessaryÅ For USA and Canadaı Except for USA and CanadaSlide hammer set:YB-6096 1Stopper guide plate:90890-06501 2Bearing puller:90890-06535 3Stopper guide stand:90890-06538 4Åı |
Related manuals for Yamaha 50G
manualsdatabase
Your AI-powered manual search engine