E2-7EMU01125POWER TRIM/TILT SWITCHThe power trim/tilt adjusts the motorangle in relation to the transom. Thepower trim/tilt switch is located on theside of the bottom engine cowling.Pushing the switch “UP” trims the motorup, then tilts the motor up. Pressing theswitch “DN” tilts the motor down andtrims the motor down. When the switchbutton is released, the motor will stop inits current position.wUse the power trim/tilt switch located onthe bottom engine cowling only whenthe boat is at a complete stop with theengine off. Attempting to use the cowl-ing-mounted power trim/tilt switch whilethe boat is moving could increase the riskof falling overboard and could distractthe operator, increasing the risk of colli-sion with another boat or an obstacle.NOTE:Refer to the section “Adjusting TrimAngle” and “Tilting Up/Down” for instruc-tions on usage.302021DNUP
