12Screen OperationsBasic Operations1. Turn the main knob to select an item. The selected item is highlighted.An arrow > on the right indicates that there is sub menu.2. Press the main knob to execute a selection.3. Repeat steps 1 and 2 until you reach the edit parameter screen.To edit parameters that have selected values, turn the main knob to select a value. Thevalue will not be updated and the sound will not change until you press the main knob toexecute the change.To edit parameters that have continuous values, turn the main knob to change the valuefor that parameter. The value is changed in real time as you turn the knob.4. For parameters with selected values, press the main knob to execute the edited value.Press the [ ] (back) key to move up to the previous screen. (Press and hold it to return to the HOME screen.)Using a USB Flash Drive to Save/Load DataThe setting data for this product can be saved to a USB flash drive. This function is convenient when using the samesettings for many speakers.Saved files are categorized into full-range speakers and subwoofers; the two types of files are not compatible. Save to USB flash drive (SAVE)On the HOME screen of the speaker that is the data source, select UTILITY DEVICEBACKUP SAVE TO USB. Follow the on-screen instructions to save the data. Load from USB flash drive (RESTORE)On the HOME screen of the speaker to which the data will be loaded, select UTILITY DEVICE BACKUP RESTORE FROM USB. Follow the on-screen instructions to load thedata.Full range SubwooferMain knob[ ] (Back) key