Yamaha EK40G Service Manual

6H95G11 6-22987654321Drive shaft and lower case6. Install the propeller, shear pin and pro-peller nut, and then tighten the nut fingertight. Place a block of wood between theanti-cavitation plate and propeller to keepthe propeller from turning, and then tight-en the nut to the specified torque.w9 Do not hold the propeller with yourhands when loosening or tightening it.9 Be sure to disconnect the battery leadsfrom the battery and the clip from theengine stop lanyard switch.9 Put a block of wood between the anti-cavitation plate and propeller to keep thepropeller from turning.NOTE:If the hole in the propeller nut 5 do not alignwith the cotter pin hole, tighten or loosen thenut until they are aligned.7. Insert a gear oil tube or gear oil pump intothe drain hole and slowly fill the gear oiluntil oil flows out of the check hole and noair bubbles are visible.8. Install the check screw and quickly installthe drain screw.56F6608406F6608506F630210Recommended gear oil:Hypoid gear oilAPI: GL-4SAE: 90Oil quantity:315 cm 3(10.65 US oz, 11.11 Imp oz)