GENINFO General information1-13 69M3E11Automatic tilt support and steering pivot immobilization systemThe tilt support lever is constantly pushed against the clamp bracket by the force of a spring.When the outboard motor is fully tilted up in the forward steering position, the stopper linked to thetilt support lever is inserted into the swivel cutout. At the same time, the tilt support lever automati-cally supports the outboard motor on the clamp bracket.If the outboard motor is tilted up with the steering in either direction, the stopper is not inserted intothe swivel cutout and the tilt support lever linked to the stopper does not support the outboardmotor.The stopper, which is fitted on the swivel, prevents the outboard motor from swiveling when fullytilted up in the forward steering position.1 Spring2 Tilt support lever3 Stopper4 Swivel recessS69M1220213 4
