POWR Power unit5-31 69M3E11Assembling the cylinder block1. Apply grease to the new oil seal, andthen install it into the cylinder block.2. Install the new ball bearing into the cylin-der block.CAUTION:Do not reuse the bearing, always replaceit with a new one.Disassembling the crankcase1. Remove the bolt and oil seal housing.NOTE:Insert a flat head screwdriver between thetab of the oil seal housing and the tab of thecrankcase to pry open the two parts.2. Remove the O-ring.3. Remove the oil seals.Driver rod L3 1: 90890-06652Needle bearing attachment 2:90890-06613Driver rod LS 3: 90890-06606Bearing outer race attachment 4:90890-06624S69M580012AAS69M582034ES69M5830S69M5840S69M5850
