Trouble Recovery68EMU29471Replacing fuseIf a fuse has blown, remove the electrical cov-er, open the fuse holder and remove the fusewith a fuse puller (if equipped). Replace it witha spare one of the proper amperage.WARNINGEWM00630Be sure to use the specified fuse. An in-correct fuse or a piece of wire could allowexcessive current flow. This could causeelectric system damage and a fire hazard.NOTE:Consult your Yamaha dealer if the new fuseimmediately blows again.1. Electrical cover2. Fuse puller3. Spare fuse (5 A, 10 A, 15 A, 20 A, 30 A, 80A)1. Electric throttle valve / ECM (Electronic con-trol module) fuse (10 A)2. Ignition coil / Fuel injector / Variable cam-shaft timing / ECM (Electronic control mod-ule) fuse (30 A)3. Main switch / PTT switch fuse (20 A)4. Starter relay fuse (30 A)5. Fuel feed pump fuse (5 A)6. Fuel pump fuse (15 A)7. Engine main fuse (80 A)
