E3-14309016EMU00258WARMING UP ENGINE1) Before beginning operation, allow theengine to warm up at idling speed for3 minutes. (Failure to do this willshorten engine life.)2) Be sure the low oil pressure warningindicator goes off after starting theengine.3) Check for a steady flow of water fromthe cooling-water pilot hole.cC8 If the low oil pressure indicator doesnot go off after the engine starts, stopthe engine. Otherwise, serious enginedamage could occur. Check the oil leveland add oil if necessary. If the cause forthe low oil pressure warning indicatorcannot be found, consult your Yamahadealer.8 A continuous flow of water from thepilot hole shows that the water pumpis pumping water through the coolingpassages. If water is not flowing out ofthe pilot hole at all times while theengine is running, do not continue torun the engine. Overheating and seri-ous damage could occur. Stop theengine and check to see if the waterinlet on the lower casing is blocked. Ifthe problem cannot be found and cor-rected, consult your Yamaha dealer.
