Basic components17EMU26340Tilt support lever for power trim andtilt or hydro tilt modelTo keep the outboard motor in the tilted upposition, lock the tilt support lever to theclamp bracket.EMU26372Top cowling lock lever(s) (turn type)To remove the engine top cowling, turn thelock lever(s) and lift off the cowling. When in-stalling the cowling, check to be sure it fitsproperly in the rubber seal. Then lock thecowling again by returning the lever(s) to thelock position.EMU26460Flushing deviceThis device is used to clean the cooling wa-ter passages of the motor using a gardenhose and tap water.NOTE:For details on usage, see page 54.EMU31702Water separatorThis engine has a combination fuel filter/wa-ter separator and associated warning sys-tem. If water separated from the fuelexceeds a specific volume, the warning de-vice will activate.Activation of warning device The water separator warning indicator willblink. The buzzer will sound intermittently onlywhen the gear shift is in neutral. If the warning system has activated, stopthe engine and consult a Yamaha dealerimmediately.1. Top cowling lock lever(s)ZMU035951ZMU050931. Flushing device1ZMU05095ZMU05474
