Trouble Recovery851. Stop the engine.2. Remove the top cowling.3. Remove the plastic tie.4. Disconnect the water detection switchcoupler. NOTICE: Be careful not to getany water on the water detectionswitch coupler, otherwise a malfunc-tion could occur. [ECM01950]5. Unscrew the filter cup from the filter hous-ing. NOTICE: Be careful not to twist thewater detection switch lead when un-screwing the filter cup. [ECM01960]6. Drain the water in the filter cup by soakingit up with a rag.1. Water separator-alert indicator1. Plastic tie1. Water detection switch coupler1. Filter cup2. Water detection switch lead©2019 Yamaha Motor Corporation, U.S.A.