Operation33EMU27820Stopping engineBefore stopping the engine, first let it cool offfor a few minutes at idle or low speed. Stop-ping the engine immediately after operatingat high speed is not recommended.EMU27844Procedure1. Push and hold the engine stop button orturn the main switch to “ ” (off).2. After stopping the engine, disconnectthe fuel line if there is a fuel joint on theoutboard motor.3. Tighten the air vent screw on the fueltank cap (if equipped).4. Remove the key if the boat will be leftunattended.NOTE:The engine can also be stopped by pullingthe lanyard and removing the lock plate fromZMU04399ZMU04398ZMU04400ZMU02041
