PERIODIC MAINTENANCE AND MINOR REPAIR6-1765. Install and tighten the filler bolt.6. Check the final gear case for oilleakage. If oil is leaking, check forthe cause.EAU04861Checking the coolant levelThe coolant level should be checked asfollows before each ride. In addition,the coolant must be changed at the in-tervals specified in the periodic mainte-nance and lubrication chart.1. Place the motorcycle on the cen-terstand.NOTE:_ The coolant level must be checkedon a cold engine since the levelvaries with engine temperature. Make sure that the motorcycle ispositioned straight up whenchecking the coolant level. A slighttilt to the side can result in a falsereading._2. Check the coolant level in thecoolant reservoir.NOTE:_The coolant should be between theminimum and maximum level marks._Recommended final gear oil:Shaft drive gear oil(Part No.: 9079E-SH001-00)Oil quantity:0.2 L (0.18 Imp qt, 0.21 US qt)1. Maximum level mark2. Minimum level mark
