OPERATION AND IMPORTANT RIDING POINTS5-15EAU15952Read the Owner’s Manual carefully tobecome familiar with all controls. Ifthere is a control or function you do notunderstand, ask your Yamaha dealer.WARNINGEWA10272Failure to familiarize yourself withthe controls can lead to loss of con-trol, which could cause an accidentor injury.EAU48711TIPThis model is equipped with: a lean angle sensor to stop the en-gine in case of a turnover. In thiscase, the multi-function display in-dicates error code 30, but this isnot a malfunction. Turn the key to“OFF” and then to “ON” to clearthe error code. Failing to do so willprevent the engine from startingeven though the engine will crankwhen pushing the start switch. an engine auto-stop system. Theengine stops automatically if leftidling for 20 minutes. If the enginestops, simply push the startswitch to restart the engine.EAU51792Starting the engineIn order for the ignition circuit cut-offsystem to enable starting, one of thefollowing conditions must be met: The transmission is in the neutralposition. The transmission is in gear withthe clutch lever pulled and thesidestand up.See page 3-25 for more informa-tion.1. Turn the key to “ON” and makesure that the engine stop switch isset to “ ”.The following warning lights andindicator light should come on fora few seconds, then go off. Oil level warning light Coolant temperature warninglight Engine trouble warning light Immobilizer system indicatorlightNOTICEECA17671If the above warning lights or indica-tor light do not come on initiallywhen the key is turned to “ON”, or if
