Yamaha Fazer FZ6-S Owner's Manual

Also see for Fazer FZ6-S: Owner's manual

Contents

INSTRUMENT AND CONTROL FUNCTIONS3-73itself automatically and the display willreturn to the prior mode after refuelingand traveling 5 km (3 mi).ClockTo switch the air intake temperaturedisplay to the clock, first set the displayto the odometer or tachometer mode,and then push the “RESET” button forat least two seconds.NOTE:The clock is automatically displayedwhen the key is turned to “OFF”.To set the clock:1. Push the “SELECT” button and“RESET” button together for atleast two seconds.2. When the hour digits start flashing,push the “RESET” button to set thehours.3. Push the “SELECT” button, andthe minute digits will start flashing.4. Push the “RESET” button to setthe minutes.5. Push the “SELECT” button andthen release it to start the clock.Air intake temperature modeThe temperature displayed may varyfrom the outside temperature depend-ing on engine conditions. To switch theclock to the air intake temperaturemode, first set the display to the odom-eter or tachometer mode, and thenpush the “RESET” button for at leasttwo seconds.Fuel meterThe fuel meter indicates the amount offuel in the fuel tank. The display seg-ments of the fuel meter disappear to-wards “E” (Empty) as the fuel leveldecreases. When only one segment isleft near “E”, refuel as soon as possible.NOTE:This fuel meter is equipped with a self-diagnosis system. If the electrical circuitis defective, the display segments willflash. If this occurs, have a Yamahadealer check the electrical circuit.Coolant temperature meterWith the key in the “ON” position, thecoolant temperature meter indicatesthe temperature of the coolant. Whenthe key is turned to “ON”, all of the dis-play segments of the coolant tempera-ture meter will appear one after theother and then disappear in order totest the electrical circuit. The coolanttemperature varies with changes in theweather and engine load. If the top seg-ment flashes, stop the vehicle and letthe engine cool. (See page 6-37.)CAUTION:ECA10020Do not operate the engine if it isoverheated.Self-diagnosis devicesThis model is equipped with a self-diag-nosis device for various electrical cir-cuits.If any of those circuits are defective, theengine trouble warning light will comeon, and then the multi-function displaywill indicate a two-digit error code (e.g.,12, 13, 14).This model is also equipped with a self-diagnosis device for the immobilizersystem.5VXE1.book Page 7 Monday, February 9, 2004 5:39 PM