7-12ESU00135DrivingWARNING@Be sure to read the “SAFETY INFORMATION” and“Riding your snowmobile” sections carefully beforeoperating the snowmobile.@NOTE:@Make sure that the engine is warmed up enough beforeriding.@For MM600 / SX6001. Release the parking brake by moving the parkingbrake lever to the right.2. Press the throttle lever slowly to move the snowmo-bile.3. Turn the handlebar in the desired direction.4. Squeeze the brake lever to stop the snowmobile.5. Apply the parking brake by moving the parking brakelever to the left.For VT600 / VX600ER1. Select the desirable operating position by moving thedrive select lever.1 Push down2 “FWD” Forward3 “REV” ReverseWARNING@ Make sure that the throttle lever is fully releasedand the snowmobile is at a full stop before shift-ing. Be sure to move the drive select lever to forwardor reverse until it stops completely while theengine is idling. Make sure that the area behind the snowmobile isclear before reversing. Watch behind. Reduce speed and avoid sharp turning whenoperating the snowmobile in reverse.@NOTE:@The reverse buzzer beeps while the drive select lever isin reverse.@