Yamaha NS-555 Owner's Manual

Also see for NS-555: Product catalog Product bulletin Owner's manual

Contents

2.When placing the speakers, be sure to use the stands toincrease stability.NoteThe provided stands are in two types. Two stands are for the rightside and others are for the left side. Attach each stand to the properposition on the bottom of the speaker by following the figurebelow.Use the 8 specified holes located on the base of the speaker.Procedure:1 First, put the screw through the washer, then throughthe inner hole of the stand, and screw it into the outsidehole of the speaker. Do not tighten too much at thispoint.2 Put a screw through the outer hole on the stand, andscrew it into the other hole on the base of the speaker.3 Tighten both of the screws firmly.4 Attach a pad to the bottom of the end portion of thestand.5 Attach the other stands to the other corners of the baseof the speaker in the same way and confirm that all 4stands have been firmly attached.NoteBe carefull not to apply force to the side of the speaker, otherwisethe speaker may fall causing damage to the speaker or personalinjury.ATTACHING THE STANDS(L) (R)Stand (R x 2, L x 2)Pad x 4 Washer x 4 Screw(25mm) x 8Back(L)(R)(R)(L)FrontView from the bottom of the speakerOuter holeInner hole1 2