EnglishE-5Mount the rear and rear center speakers on a shelf, rack ordirectly on the floor, or hang them on the wall.To mount the rear and rear centerspeakers on a wall by using the holeson the speakers’ back panels1 Put the provided pads at the four corners on the rear ofthe rear and rear center speakers to prevent the rearand rear center speakers from moving by vibrations.2 Fasten screws into a firm wall or wall support as shownin the figure.3 Hang the holes on the protruding screws.* Make sure that the screws are securely caught by thenarrow parts of the holes.* You can use the lower holes on the rear of the rearspeakers.WARNING● Each speaker weighs 1.1 kg (2 lbs. 6 oz.). Do notmount them on thin plywood or a wall with softsurface material. If mounted, the screws may comeout of the flimsy surface and the speakers may fall.This damages the speakers or causes personalinjury.● Do not install the speakers to a wall with nails,adhesives, or any other unstable hardware. Long-term use and vibrations may cause them to fall.● To avoid accidents resulting from tripping over loosespeaker cables, fix them to the wall.● Select a proper position on the wall to mount thespeaker so that no one will injure his/her head orface. Mounting the rear and rear center speakers13Wall/ wallsupportTapping screw(Available at thehardware store)Min.20 mm60 mmDiam. 3.5 to 4 mm6 mmHoles2